84 series thin emergency stop switch
The introduction of 84 series aims to meet the needs of equipment manufacturers and users. Typical uses include the following areas: machinery and process control equipment, including production lines, cranes, robots, mobile platforms, as well as safety systems and emergency exits.
Plastic or anodized aluminum lenses are available in many different colors.
To meet modern component standards, this series has been connected to printed circuit boards.
84 series thin emergency stop switch is suitable for small control panel. If the space requirements are high, the 84 series can be easily used because they are portable and compact. Yellow protection can be used to stop accidental activation.
84 series buttons are suitable for a wide range of industrial applications, ensuring reliable switching even under various light loads.
The series is "integral" in design, so no additional assembly is required.
The double break switch system can be used for the following switching functions:
· 1 N.C., 2 N.C., 1 N.C. + 1.0 N.O
The new standard of emergency stop switch conforms to en IEC 60947-5-1, en IEC 60947-5-5 (emergency stop), en iso13850, en 60947-5-1.
IEC stands for the International Commission on electronics and technology and is the world's leading organization for the preparation and publication of international standards for all electrical, electronic and related technologies.
-25°c … +65°c
-25°c … +80°c
The front protection is regulated by IP65 and is rated as "dustproof" and prevents water from spraying out of the nozzle
They are used to define the level of sealing effectiveness of the electrical enclosure against foreign matter (tools, dirt, etc.) and moisture intrusion.
The numbers after IP have their own meanings. They represent the following:
· first digit (intrusion protection)
· second digit (moisture protection)
UL is a global leader in product safety testing and certification
Sev (designated by Switzerland)
din en iso 13850
Features and advantages
· nominal contact voltage AC: 250 V
· nominal contact voltage DC: 250 V
Maximum contact current: 5A
Turn clockwise to unlock
Standard model: flat ribbon cable length 300 mm or plug-in terminal 2.8 x 0.5 mm
This is a slow switching element